VividSynths

User Tools

Site Tools

Trace:
vividtracker_reference_manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
vividtracker_reference_manual [2025/02/22 15:39] – larsvividtracker_reference_manual [2025/03/13 20:46] (current) – [Screen 1B] lars
Line 80: Line 80:
 This screen replaces the STEPS function from SCREEN 1A with a BOOST function. BOOST allows you to boost the volume. This is great for modules with low amplitude, but modules with already high amplitude will get through the roof and you get distortion. BOOST=1 equals no boost. On this screen, you can also set if the tracker should be in 4-tracks or 8-tracks mode by pressing the "4" button. The button will change to "8" in order to indicate that you are now in 8-tracks mode. By pressing the "5-8" button, you can change the tracker view to display tracks 5 to 8. Press "1-4" to get back to tracks 1-4. This screen replaces the STEPS function from SCREEN 1A with a BOOST function. BOOST allows you to boost the volume. This is great for modules with low amplitude, but modules with already high amplitude will get through the roof and you get distortion. BOOST=1 equals no boost. On this screen, you can also set if the tracker should be in 4-tracks or 8-tracks mode by pressing the "4" button. The button will change to "8" in order to indicate that you are now in 8-tracks mode. By pressing the "5-8" button, you can change the tracker view to display tracks 5 to 8. Press "1-4" to get back to tracks 1-4.
  
-A new button called DUP allows you to easy duplicate a pattern. Select a pattern that you want to duplicate at a specific position in your song, e.g. pattern 3 at position 7. You want to create a slightly different version of pattern 3 at position 7. When you press DUP, VividTracker will search for an empty pattern (e.g. pattern 1) and copy pattern 3 to that pattern. VividTracker will then set the new pattern number (e.g. pattern 1)to the current position in your song (e.g. position 7).+A new button called DUPI allows you to easy duplicate and insert a new pattern. Go to a position in your song. Press DUPI and it will insert a new position, move to the new position, and make a copy of the pattern in the previous position. For instance, say that you stand in song position 3, pattern 4. Press DUPI and it will move to position 4 where it will insert a new pattern which will be a copy of pattern 4.
  
 VividTracker allows you to load two modules at the same time, as "Mod A" and "Mod B". This is a great feature where you can easily swap between two modules. Say for instance that you are making a new song but you want to take inspiration from another module. You can then load the other module as module B. The button "MOD A" tells you that you are currently working on module A. Press it to swap to module B. The button will now read "MOD B". The module will be empty if you have not yet loaded anything to module B. Press the button again to swap back to module A. The same button is also present in Screen 2A & 2B, and Screen 4A. VividTracker allows you to load two modules at the same time, as "Mod A" and "Mod B". This is a great feature where you can easily swap between two modules. Say for instance that you are making a new song but you want to take inspiration from another module. You can then load the other module as module B. The button "MOD A" tells you that you are currently working on module A. Press it to swap to module B. The button will now read "MOD B". The module will be empty if you have not yet loaded anything to module B. Press the button again to swap back to module A. The same button is also present in Screen 2A & 2B, and Screen 4A.
vividtracker_reference_manual.txt · Last modified: 2025/03/13 20:46 by lars

Page Tools